This guide is for beginners, to show you how to add e-liquid into your e-cigarette.First of all, let’s make clear the structure of e-cigarette.It’s easy to see when you need to refill it, since the tank is clear. Tanks always come empty and must be filled with e-liquid before use.

1. The Battery

It provides the power to vaporize the liquid. It is typically rechargeable and is activated by either the push of a button or automatically when the user inhales.

2. The Atomizer

When battery power is applied to the atomizer, a coil heats up and vaporizes liquid as the user inhales.

3. The E-liquid Tank

E-liquid tanks come in a few different sizes and hold the vaping e liquid by an acrylic or glass tube. It’s easy to see when you need to refill it, since the tank is clear. Tanks always come empty and must be filled with e-liquid before use.

4. The Mouthpiece

It is the part that users use mouth to inhale and exhale e-cigarette.

 

Now let’s see how to add e-liquid into your e-cigarette.

1) Unscrew the e-cigarette

Before you add e-liquid into tank, firstly put on gloves to keep from dirty hand. Then unscrew the e-cigarette, just as the picture shows.

2) Take out the atomizer

Put battery aside, then take out the atomizer.

3) Inject e-liquid along the edge

Put the E-liquid bottleneck close to the edge of e-liquid tank and then inject the e-liquid. The volume of e-liquid should be under 2/3 volume of tank.

4) Notice: do not inject e-liquid from the below hole. Otherwise the e-cigarette will be burned out.

5) Finally, it is better to not use immediately after inject well the e-liquid. Just wait 1-2 minutes to let the e-liquid steep fully the tank and atomizer, which will give you better vaping experience.